Larger 3 into 1 Color Wheels

Working on more, will post once they get printed.

This is an updated version of my color wheel with variations.

I have a Zonestar Z9M3 (3into1) using marlin and the source files included are just gcode I used, so you may need to adjust, need 300mmx300mm bed.

2 layers both 0.3mm. I sliced with only 1 layer, so second is just a copy so nozzle comes into contact with all ready printed 2nd layers.

1st layer is for color changing. Works good for the prints going from one color to the next. But the color wheel I need to adjust a bit more, maybe 3 layers.

Images should be marked, So far I think each brand of filament will get a different color wheel.

Working on CMY, (CMYK/W, CMYKW soon) I want a red going to yellow while using CMY.

If you make or sell Filament or Mixing hotends I would love to test them out, send me a demo to keep and report on.

I will have more of a report with additional images and microscope images of mixed prints soon on my web site, once done I will have link here.

**Current Inland Color wheel needs adjusting on the left color changes and more yellow though out, working on that now/soon.

If you print your own, you will need to adjust the gcode manual for your unit / filaments
temps
autobed level
before print purge at -20y 220x

If you print your own please share, I would also love permission to share different types of prints.

Thanks! Enjoy!
`mike