Electric Propeller, VDM type
$7.00 Electric Propeller, VDM type
3D
Published 2023-02-20T14:11:10+00:00
This model is made to explain the structure and principle of the VDM Electric Constant Speed Propeller developed in Germany in order to mount the motor cannon in the propeller shaft of the inverted V12 engine (see below).
https://www.myminifactory.com/object/3d-print-inverted-v-type-12-cylinder-engine-water-cooled-cutaway-270866
Due to the size of the model, the number of gear teeth is halved according to internet information.
VDM is the company name "Vereinigte Deutsch Metalwerke".
(English translation: United German Metal Works)
A. Features of this model
① Used as the differential gear by using gears with "different number of teeth"
② Use the "Worm Gear" to change the propeller pitch angle
③ Electric motor used to change propeller pitch
④ DC Motor Drives are provided.
[Others] An electric governer is used to stabilize the propeller speed, but it is omitted.
Device of the propeller pitch control is omitted.
[Video] https://youtu.be/WIBZOmQqVAA
B. Assembly Manual (PDF format, total 19 pages)
The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping, gluing and tightening)".
Finishing of gear teeth is very important to get smooth rotation.
C. Purchase Parts
1. Metal Bearings : 675ZZ(5x8x2.5) x2, 6803ZZ(17x26x5), 689ZZ(9x17x5) x2, 6901ZZ(12x24x6) x2
: HK0910(9x13x10,Needle), HK1210(12x16x10,Needle)
2. AL Pipe : φ3, 9
3. Drill and Tap
My design hole diameter is considerably smaller than the finish hole diameter in order to ensure the wall thickness at the time of printing.
Drill : φ1, 1.5, 3.2, 9.2 Tap : M1.4, M2
D. STL files
Files: STL Files (36 items (Total))
“ws” of last 2 digits means “With Support” special designed.
E. Total Net Print Time: Approx. 41HR
(Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and
No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.
F. 3D printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
I do hope you enjoy making!!
| Date published | 20/02/2023 |
| Price | $7.00 |