Courtyard of the Lions, Alhambra - Granada, Spain

¡Bienvenidos a Granada, España!

Welcome to Granada, Spain!

Roberto from @MaquetasCNC brings to the MiniWorld3D catalog an all-time favorite and top attraction: The Alhambra of Granada, in southern Spain!

Specifically, this is a detailed section of the Alhambra's most famous feature: **El Patio de los Leones / *The Courtyard of the Lions.*

It is the most recognized section in the heart of the Alhambra, which is a historical citadel formed by a complex of palaces, gardens and forts.

The rectangular courtyard measures about 29 meters long and 16 meters wide, surrounded by a complex pattern of arches and columns that feature an intricately-carved stucco decoration ("sebka" in Arabic).

The courtyard also features a sophisticated system of water channels that intersect at the center of the courtyard, where the famed Fountain of the Lions stands. This fountain consists of a large elevated basin surrounded by twelve stylized lion sculptures, all carved from marble.

MiniWorld3D is excited to bring this model to life as a homage to all the people of Granada. All our models are made from scratch by hand and brain, please give credit to all authors.

Be sure to follow MiniWorld3D and MaquetasCNC!

instagram.com/miniworld3d

instagram.com/maquetascnc

MiniWorld3D is a collective of 44+ artists creating the best library of 3D printable models of landmarks of the world!

Print photos by Roberto Sánchez & Josema in white & natural PLA.

-----------

LICENSE

Model created by Roberto Sánchez (www.maquetascnc.com) using public historic drawings (https://www.alhambra-patronato.es/ria/handle/10514/16/browse?value=Patio+de+los+Leones&type=subject) and site photos.

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)

You are free to:
Share - copy and redistribute the material in any medium or format but only under the following terms:
Attribution - You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

NonCommercial - You may not use the material for commercial purposes.

NoDerivatives - If you remix, transform, or build upon the material, you may not distribute the modified material.

No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

More info: https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode

The licensor cannot revoke these freedoms as long as you follow the license terms.

Modelo creado por Roberto Sánchez (www.maquetascnc.com) a partir de planos históricos de dominio público (https://www.alhambra-patronato.es/ria/handle/10514/16/browse?value=Patio+de+los+Leones&type=subject) y fotografías del lugar.

Este trabajo está licenciado bajo la licencia Creative Commons Atribución/Reconocimiento-NoComercial-SinDerivados 4.0 Internacional

Usted es libre de:
Compartir - copiar y redistribuir el material en cualquier medio o formato únicamente bajo las condiciones siguientes:
Reconocimiento - Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace.

NoComercial - No puede utilizar el material para una finalidad comercial.

SinObraDerivada - Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.

No hay restricciones adicionales ó No puede aplicar términos legales o medidas tecnológicas que legalmente restrinjan realizar aquello que la licencia permite.

Más información https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode.es

El licenciador no puede revocar estas libertades mientras cumpla con los tÈrminos de la licencia.

Printing Instructions

Suggested parameters:

For better details, print slow, such as 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.

Perimeters: at least 3
Top solid infill: at least 4

Remove the horizontal bars that connect the columns, those are included in the model only for structural purposes to facilitate printing. Follow the image provided.