6 in 1 Milwaukee Packout Mount

Made this custom 6 in 1 Packout mount. can hold 2 levels, bits, framer's square, speed square and ext pole.

The ext pole can also be used for other accessories with the appropriate diameter. Have the measurements listed for reference.

A great way to handle and easily access extra tools that don fit inside the packout unit.

Install is fairly straightforward and requires the Metal vertical rail located on the corner of the packout boxes to be removed, have the mount slide on, and reinstall the rail to its original position.
The rails are universal, so this and my other mounts can be positioned in what ever way works best for you.

The dimensions are as follows. Please keep in mind that these are based off of common tools and may differ from what you are currently using. I did test a bunch of different brands and found the majority worked without additional modifications.

Level cut out - 76mm x 44mm
Speed square - 183mm x 6mm
framers square - 72mm x 4mm
Ext Pole - 40mm x 35mm ( oval shape)

In case you are looking for different configurations, Check out our other packout designs in Collections. you can also message me if you're looking for something specific.

PLA or PETG
.2mm
30% infill

Have used both materials without issue. If you are looking for the stronger solution go with PETG.