Vsett electric scooter voltage screen cover

This Vsett voltage cover and sun protector was designed to solve the issue of not being able to see the numbers on the voltage screen of the Vsett 8 electric scooter when riding in bright sunlight. I couldn't find a suitable cover to purchase, so I made my own. ( I just found some store on etsy selling it as an addon to a 50 dollar screen cover. Thats way too much money.)

The cover press fits into place with no need for adhesives and has been tested on a 20km ride with no issues. Different versions files of the design are available for customization.

The two final products ready to print are:
- the grey version seen in the photos
- the grey version seen in the photos without the sun cover

If you want to customize this design further, feel free to message me and we can collaborate on it.

Additionally, if you enjoyed this model, be sure to check out my free designs on printables at https://www.printables.com/social/502962-shinishisou/models

Printer used: Two Trees Bluer
Print speed: 50 mm/s
Layer height: 0.12 mm
Support: Yes, regular supports. I did not try printing with tree supports.
Build plate adhesion: I used a brim with 5 lines but if you have good adhesion it's probably not needed.

Print time: 1:10h (with the settings and printer used)