The wine barrel planter

Become a barrel maker! Print and assemble this cute wine barrel planter. This is a new object of the legendary Dreamtime24's wine barrel series :)

The wine barrel planter makes a perfect gift.

The wine barrel planter really consists of 19 single staves which give the barrel a realistic look. The barrel is 8,5 cm (3.3 inches) high and 9.7 cm (3.82 inches) wide. The inner pot has an inner diameter of 7.5 cm (2.9 inches) and an inner heigth of 6.8 cm (2.7 inches).

Please do not resize the model in your slicer, as the tolerances are designed for the present size.

The inner pot should be printed in PETG or a similar material to make it resistant against the humid soil.

If you need another wine barrel without the flower pot functionality, you might consider my following Thingiverse objects:

https://www.thingiverse.com/thing:5390822
https://www.thingiverse.com/thing:5396937
https://www.thingiverse.com/thing:5428998
https://www.thingiverse.com/thing:5429028

List of items to print:
- Planter stave V1.stl
Print this item 19 times in a brown color.

• Planter cover bottom V1.stl
  Print this item once in a brown color.

• Planter cover top V1.stl
  Print this item once in a brown color.

• Planter ring small V1.stl
  Print this item once in any color you like.

• Planter ring large V1.stl
  Print this item once in any color you like.

• Planter inner pot V1.stl
  Print this item once in any color you like in PETG or another water resistant material.

• Planter stave +1mm V1.stl

• Planter stave -1mm V1.stl
  Print in a brown color only if the staves do not form the 360 degrees angle.
  Use these segments as a substitution for one or more normal segments. Example: If there is a 2 mm gap, exchange 2 normal segments against 2 segments which are 1 mm wider each.

The assembly is easier than the assembly of my other barrels. You will need a rubber band to avoid frustration. Please look at the assembly instructions further down. No glue is needed, everything comes together nicely.

Enjoy printing this object.

Resolution: 0.2 mm initial layer, 0.2 mm layer height, use experimental feature "adaptive layers" in Cura
Infill: 10 %

Nozzle not larger than 0.4 mm.

If you use the Cura slicer you can use the experimentatl feature "Use Adaptive Layers" to save some print time for the 19 segments. I got very good results with the adaptive layers.

Do not resize the barrel in your slicer program. Everything is designed for the existing size. If you resize it, I am not sure if the segments will form the required 360 ° angle.

For detailed assembly instructions please visit
https://www.thingiverse.com/thing:5892736