BEER TAP HANDLE LUPULO 2D / 2D HOP(e) - HANDLE FOR HOP HOP HANDLE

HOP 2D - Some "HOPE" for the craft beer!

Beer tap handle with universal standard thread. It prints and twists smoothly!

Evokes the hop flowers in 2d "vector design". It can be taken from the middle or center, being a very durable design.

This design was tested and printed many times as seen in the images. Check also the other designs in here!

You have 3 options, to add details and print with other colors or remove the inner parts.

Beer tap handle - Universal standard threaded tap handle. Prints and threads without any problems!

Evokes the hop flower. Can be taken from the middle or center, being a very durable design.

Design tested and printed many times as seen in the image.

You have 3 options: Print in a version without the bas-reliefs, and then print with bas-reliefs with the option to add those faces separately to make color matching.

It can be PLA, ABS or PETG.- 0,2mm

Don't need much infill, but I recommend at least 40%.

Printing time approximately: 3 hours.

No support Needed! I recommend raft with 0 distance and a few perimeters to allow maximun adherence

Can be PLA, ABS or PETG - 0,2mm

It doesn't need much infill, but I recommend at least 40%.

Printing time 3 hours approximately.

No supports needed! Prints standing up. It is recommended to add raft with distance 0, and several perimeters to ensure adhesion to the bed.