Leprechaun
$6.00 Leprechaun
3D
Published 2023-03-07T09:38:55+00:00
This listing is for the Leprechaun only! Trap can be found HERE.
Gladiator Designs 3D and MysticSaige have teamed up once again to bring you a new design!
Celebrate Saint Patrick's Day and add a little mischief to your festivities with the Leprechaun and Leprechaun Trap (trap is sold separately)! All models were designed for easy printing and require no supports. The Leprechaun Trap is the perfect way to have some fun and get into the Saint Patrick's Day spirit - no matter where you are in the world!
The mischievous Leprechaun is made by MysticSaige and comes with 2 versions, a solid model that is reaching up for the pot of gold and an articulating model that comes with a clover and mug accessory. They also have 2 versions for the eyes so you can customize them. The articulating model has been tested up to 200% and down to 50%. Joints may fuse when printed smaller then that.
The Leprechaun Trap is made by Gladiator Designs 3D and can be found HERE. Place something shiny in the pot as bait and hang it on the lamp post. When the pot is pulled down the trap doors are activated and the leprechaun falls into the hallow stump below. Its a sure way to catch yourself a leprechaun this year! -- There is a small amount of assembly required. It’s simple and only requires a #4 rubber band to keep the latch in place. Assembly and operation video here: https://youtu.be/Io-nDodNqgY
_______________________
Please feel free to share images of your prints, we would love to see what you do with them! ^_^
_______________________
All my models are for personal use only. You may never redistribute or sell my files in any way.
If you are interested in selling 3D Prints of my models, you may acquire a commercial license through my Tribes or Patreon.
By joining you will also gain access to Three (3) free model releases per month, a welcome package of 20+ models, exclusive models, and a 50% off discount code to MysticSaige MyMiniFactory store! Stop on by and check it out!
Happy Printing!!
Designed to print-in-place and require NO supports!
3+ perimeters (the more the stronger it will be).
15%+ infill.
Have bridge settings enabled.
Make sure to have good bed adhesion or use a brim/raft.
Great in PLA!
| Date published | 07/03/2023 |
| Price | $6.00 |
| Support Free | YES |