Minecraft textured creeper

My son asked me to print him a Creeper. So I searched various sources for a suitable model.

Unfortunately, the various models never convinced me 100%. Often proportions didn't fit or the texturing was already so pronounced at a small size that the print definitely wouldn't have worked if scaled up.

So I created my own version.

I used an image on a Minecraft fan site (https://minecraft.fandom.com/wiki/Creeper) as a template. In the design, each block in the image corresponds to a block of size 10mm x 10mm x 10mm. Thus, the correct proportions should be ensured.

The model has a rotatable head.

The face and toes are independent print files.

Almost all surfaces have been textured.

For the feet, deviating from the template, I added a small gap for separation.

IMPORTANT!!!

The feet have different textures that have also been applied to the toes. Thus, each foot has its own individual toe. The toes have been labeled accordingly:

FL = front-left

FR = front-right

BL = rear-left

BR = rear-right

Size: 80mm x 120mm x 260mm

The printing time is a little longer due to the size. Depending on the settings, it can range from half a day to two days.

The model is quite material hungry. To counteract this, I used "Lightning" with a density of 30% as the infill pattern.

The use of support structures is recommended. In the attached pictures, the most important positions should be clearly visible.