Spare part for Seat Ibiza II trunk tray washer for Seat Ibiza II / Repuesto para la cuerda elavadora de la bandeja del maletero para Seat Ibiza II

A complete spare part for the rope that lifts the trunk tray of the Seat Ibiza II car.

It is needed:

-4mm diameter rope or smaller.

• Glue (optional)

The design consists of the following:

1x Bracket.

1x Support clip.

1x Tray trim.

1x Tray trim lock.

The assembly is easy. There are example pictures that can help you.

1º Pass one end of the rope through the hole of the "support clip" and tie a knot (cut the excess).

2nd Insert the "tray trim" into the hole in the tray of your car and close the assembly with the "tray trim lock".

4º Pass the string through the hole and tie a knot at the distance you want.

Thank you for your purchase.

ENGLISH

A complete replacement for the rope that lifts the trunk tray of the Seat Ibiza II car.

Needed:

-4mm diameter rope or smaller.

• Glue (optional)

The design consists of the following:

1x Stand.

1x Support clip.

1x Tray trim.

1x Tray trim lock.

The assembly is easy. There are example pictures that can help you.

1st Pass one end of the rope through the hole in the "support clip" and tie a knot (cut off the excess).

2nd insert the "tray trim" into the hole in the tray of your car and close the assembly with the "tray trim fastener".

4th Pass the rope through the hole and tie a knot at the distance you want.

Thank you for your purchase.

It is recommended to print on PETG or better.

Layer height 0.20 or less.

Filling 20%.

ENGLISH

It is recommended to print on PETG or higher.

Layer height 0.20 or less.

20% fill.