Marge Simpson keychain

Our STL file is the perfect way to get a personalized 3D printed Marge Simpson keychain. With the file downloaded, you will simply need a 3D printer to print the keychain in the comfort of your home.

Downloading the STL file is quick and easy, and once downloaded, you can print as many keychains as you want. In addition, the quality of the STL file ensures detailed and accurate printing of the Marge Simpson keychain.

Don't wait any longer! Download the STL file of our Marge Simpson keychain at Cults3D and create your own 3D printed Marge Simpson keychain - we're sure you'll love it!

Got it! Here I provide you with the updated printing parameters for the Marge Simpson keychain according to your specifications:

Layer height: 0.2 mm


Colors in ascending order: white, yellow, red, light green, light blue and black.


Nozzle diameter: 0.4 mm


Print speed: 60 mm/s


Filling density: 20%



Printing temperature: Depends on the material you use, but for most PLA filaments, a printing temperature between 190°C and 220°C is recommended.


Initial layer height: 0.2 mm


Shrinkage speed: 40 mm/s


Shrinkage length: 5 mm


Travel speed: 80 mm/s

As for the configuration of layer diameters for each color, I suggest the following:

White: 0.2 mm, 0.4 mm and 0.6 mm.


Yellow: 0.8 mm, 1.0 mm and 1.2 mm


Red: 1.4 mm and 1.6 mm


Light green: 1.8 mm and 2.0 mm


Light blue: 2.2 mm and 2.4 mm


Black: 2.6 mm and 2.8 mm

Remember that these are just recommended parameters and it is always important to adjust them according to your needs and your 3D printer configuration. I hope this helps you to print your Marge Simpson keychain successfully. good luck!