3 1/2 Munchin Marvin LURE MOLD

Check out Rustybaits.ca for discounted molds

3 1/2 Munchin Marvin is a top pour swim bait designed with simplicity and effortlessness in mind. The mold comes in two parts to make it easier to remove the bait without ripping or damage to the finished project. The top pour design makes it simple to fill the cavity, and this also allows for overfilling to clean off the lures after cooling. Once the bait has cooled, use a knife to trim the overflow off for a cleaner finish. These tried and tested molds are perfect for the avid fisherman who is looking to try their hand at pouring their own lures!

Inside the download is the stl files, photos of the process, and written instructions.

Pegs
I have given ¼ holes for the alignment pegs. The pegs I used are ¼ copper tubing from Home Depot. If you drill out the holes completely, you can use anything ¼ inch (dowels, bolts, tubing, rods, etc.)
All my molds are printed in PETG.

#fishinglures #fishinggear #fishingprojects #fishingsupplies #printedlure #printedluremold #fishingdiy #fishing #bait #lure #fish #swimbait #bass #musky #walleye #crappie #pike #jig #fishingplastic

ender 3 pro
printer settings may vary, but i'll give my basics
.6 nozzle for faster print time
nozzle 245
bed temp 90
layer height .16
Infill 20% min recc. 50%
wall thickness 3.6 mm
top and bottom 2 mm