Skip to content

TP-Link TL-WR703N + Expansion Board Case

IMAG1163_display_large.jpg TP-Link TL-WR703N + Expansion Board Case
tp-wr703n_kean_v2_A2.jpg TP-Link TL-WR703N + Expansion Board Case
tp-wr703n_kean_v2_B.jpg TP-Link TL-WR703N + Expansion Board Case
tp-wr703n_kean_v2_A.jpg TP-Link TL-WR703N + Expansion Board Case
IMAG1162_display_large.jpg TP-Link TL-WR703N + Expansion Board Case
IMAG1164_display_large.jpg TP-Link TL-WR703N + Expansion Board Case
tp-wr703n_kean_v2_A.stl TP-Link TL-WR703N + Expansion Board Case
tp-wr703n_kean_v2_B.stl TP-Link TL-WR703N + Expansion Board Case
tp-wr703n_kean_v2_A2.stl TP-Link TL-WR703N + Expansion Board Case
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 238 views
  • 1 like
  • 3 downloads
  • 1 make
License
3D design format
Folder details Close
  • tp-wr703n_kean_v2_A.stl
  • tp-wr703n_kean_v2_A2.stl
  • tp-wr703n_kean_v2_B.stl

Learn more about the formats
Publication date 2023-03-19 at 10:16
?
Published to Thingiverse on: 2012-06-21 at 08:05
Design number 1122805
madox

madox

3D printer file info

3D model description

This is a case for the TP-Link TL-WR703N router with an additional open source expansion board which adds on a USB Hub for a total of 3 USB ports available, a FTDI 2232 chip with 10GPIO broken out as well as the MPSSE pins for serial/JTAG/I2C/SPI etc. i.e. this would make a great low cost/low power robotics controller.

Measurements derived from original case, with a change to a slide in arrangement to house the expansion board with the case acting as a board spacer as well.

Blog post with firmware ROMs and HOWTOs will be made available on http://www.madox.net/blog/tp-link-tl-wr703n/ shortly.

The OSHW expansion board details for the TL-WR703N is available here :- http://www.kean.com.au/oshw/WR703N/

3D printing settings

WARNING/NOTE : The recessed USB port does not have an opening with this case. The intention is that a really short USB flash drive could be used there.

Update : The tp-wr703n_kean_v2_A2.stl file has an extended portion that protects the protruding USB as well as giving extra space for the USB flash drive [tested with Sandisk Cruzer Fit mini]

Print both files. Note orientation of the "A" part might need to be rotated to avoid supports ['base' to the bottom].

Slide in router + expansion board combo gently.
Take care on the front USB to ensure it goes into the hole.

Attach the 'cover' and secure with 2 M3x4/6/8/10/12 countersunk screws [Length doesn't really matter].

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.