UNW mods on the ODDBALL PAINTBALL's OB10 v1.1 tipx mag

-2023 update
I have added a 2 piece lower model that is just made for the Dmag springs. not that this is necessary better then the stock model with the adapter piece in it. but it's just 1 less part to print and worry about loosing. in case you are not planning to use Dye springs

--

these mod parts are made to go with the v1.1 version of the OB10 TiPX magazine
that is made by:ODDBALL PAINTBALL
https://www.printables.com/model/213848-tipx-magazine-ob-10%2Fcomments

the idea of this modded parts is to make it compatible with the standard DMAG 20 rounds mag springs. this can be a handy spring to use on more delicate paint

I only had the shaped projectile (FSR)spring of the Dmag in a 14 round version, and found this to be strong of a spring. (and to short of course...) so for the use FSR I would just go for the 20 round Dye mags springs since I suspect the 20 rounder Dmag for FSR to be a bit to stiff, but I can be wrong on this

so the second thing this mod will do is helping in the mag door from closing when you things like a tactical reload.

also I gave the Dye spring just a little bit more room so there was less over compression going on when you try to lock the follower. at least this was I noticed.

how to do you assemble this mag? or do you want more details for it. I think for now the best place to start is to watch the video that I made.
https://www.youtube.com/watch?v=_q66jOopxTw&t=1s

but of course for the original files those can be found above.

and yes it does work in a FGC68TE with a TiPX mag lower. giving you the option to 3d print your marker and mags
https://www.printables.com/social/180009-untangleworks/collections/88908

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…