Albertville grant

In Albertville, as in other French cities, buildings located at the entrances of the city were used to collect entry taxes. One of these octrois, still visible today, is located in front of the town hall of Albertville. The octroi service was abolished in Albertville in 1902, and the building was then used in various ways. The stable became the headquarters of the municipal band. Then, the city had the architect Amédée Bugnard carry out work to accommodate the weights and measures administration, which was the tenant of the premises until 1974. The building was then abandoned until 2019 when the city restored the roof. Eventually it could host a tourist information point for downtown Albertville

Designed on Fusion 360 and printed on Prusa Mini with 0.25 and 0.4 mm nozzle at HO scale

Dimension 147 x 90 x114 mm

Attention the model contains very small parts, to manipulate with tweezers

In Albertville, as in other cities in France, buildings located at the entrances to the city were used to collect entrance taxes. One of these grants, still visible today, is located in front of the town hall of Albertville. The service of the granting is abolished in Albertville in 1902, the building is then used very variously. The stable becomes the seat of the Municipal Harmony. Then the City commissioned the architect Amédée Bugnard to carry out work to accommodate the administration of weights and measures. tenant of the premises until 1974. The building was then abandoned until 2019 when the city restored the roof. Eventually it could accommodate a tourist information point for downtown Albertville

Designed on Fusion 360 and printed on Prusa Mini with 0.25 and 0.4mm nozzle in HO scale

Size 147 x 90 x114mm

Please note the model contains very small parts, to be handled with tweezers

Printing and assembly instructions in pdf attached and available on http://amigagoma.free.fr/?p=1535

Printing and assembly instructions in pdf attached and available for consultation on http://amigagoma.free.fr/?p=1535