Velociraptor Claw - Jurassic Park Fanart

Welcome to Jurassic World! If you're a Jurassic Park fan or just love dinosaurs, then this 3D velociraptor claw is just what you need.

Our velociraptor claw model has been carefully designed in 3D so you can print it in SLA resin in two separate pieces, allowing you to have a claw independent of the base.

SLA resin printing ensures superior print quality and a smooth, detailed finish. Our velociraptor claw design fits perfectly on most SLA 3D printers and is easy to print.

The velociraptor claw model is an excellent collector's item for dinosaur lovers and Jurassic Park fans. It is a faithful reproduction of the velociraptor claw in the movie and can be used as a decoration in any room of your home.

Don't wait any longer and purchase this 3D velociraptor claw model to print in SLA resin and display it as a work of art. Surprise your friends and family with this spectacular piece!

FDM update!!! 09/27/2023: Added split models with flat parts ready to print with FDM printers!!!

FDM printing:

Filament: Use a high-quality filament that is compatible with your FDM printer. You can opt for a colored filament that resembles the skin of a Velociraptor or one with a textured effect for added realism.

Extruder Temperature: Adjust the extruder temperature according to the specifications of the filament you are using. Generally, temperatures for PLA are usually in the range of 190°C to 220°C.

Heated Bed: If your 3D printer has a heated bed, set it to the appropriate temperature for the type of filament you are using. For PLA, it is generally set around 50°C.

Layer Height: Set a layer height that balances print quality and print time. A layer height of 0.2 mm or 0.1 mm is a good choice to get a good balance between speed and detail.

Print Speed: Adjust the print speed according to the capabilities of your printer. A moderate print speed, around 50 mm/s, is usually adequate for quality printing.

Infill: Set the infill to your preference. For the Velociraptor claw, an infill of 20% to 30% might be sufficient to maintain structure and reduce filament consumption.

SLA printing:

Resin: Use a high quality resin that is compatible with your SLA printer. Be sure to choose a resin that provides excellent detail quality.

Layers: set a low layer height, usually between 0.05 mm and 0.1 mm, for high print quality and fine detail.

Supports: use supports automatically generated by your 3D printing software, as they will help keep the delicate parts of the claw in place during printing. Be sure to properly configure the supports to minimize contact points with the figure and facilitate removal later.

Print Speed: In SLA, print speed is generally not set in terms of mm/s as in FDM. Follow the default settings of your SLA printer for best results.

Cleaning and Post-Processing: After printing, follow the recommended cleaning and curing instructions for your specific resin. This may include rinsing the figure in isopropyl alcohol and curing under UV light to ensure proper strength.

Remember that exact specifications may vary depending on the make and model of your 3D printer, as well as the specific type of filament or resin you are using. Perform test prints to adjust the parameters according to your needs and the specific characteristics of your printer - I hope you get great results with your Velociraptor claw!

Video: https://youtu.be/G5e9BYtyfPM