EINHELL on DYSON V6

**EINHELL or OZITO Power X Change adaptor for DYSON V6 cordless vacuum cleaner

New model 2024!

To avoid index finger cramps ;-)

You have the option of using the vacuum trigger and a switch for permanent operation.

You can install only the micro switch for the trigger or only the switch.

If your Dyson's battery is dead,

rather than buying a replacement battery (or a replacement vacuum cleaner), use this adapter.

Trigger works as original.

Our Dyson vacuum cleaner is a beautiful tool,

but when the battery is empty we have to stop working.

I solved this problem. The battery is now external.

The vacuum cleaner works much better with the larger 4 amp/hour battery.

2 possibilities, with or without voltmeter.

2 versions, round or flat terminals.

Normally the Dyson cuts the battery on power-up, makes several walks, stops and then shuts down.

Do not insist and change the battery.

*The wall bracket remains operational, just remove the power jack *.

You can also cut out the white part in the photo, or replace it with the bracket to be printed.

Remove the EINHELL batteries from the adapter to charge them and store the vacuum cleaner.

Supplies

10 Wood screws 3 X 16mm

2 Flat terminals 6.3mm

or

2 Flat Electric terminal 6.3 mm Blue

1 Spring 5.5 X 17.5 mm

2 female terminals

2 non-insulated 4.8 mm female terminals (or solder wire)

1 Micro switch 20 A

1 Mini Voltmeter

Cable

1 Rocker switch

Rocker switch

4.8 female electric crimp terminals

Terminaux femelle

Spring

Flat 6.3 mm electrical terminal

Flat 6.3mm terminal

Micro switch

Voltmètre

WARNING! check your wiring before use to avoid damage. Reversed polarity can be fatal.

With CULTS license Private use,

you are authorized to manufacture adapters for your own use.

It is not permitted to resell or give away the files and adapters created.

Parkside on Dyson here

With brackets and 80° cantilever angle

There are very few brackets, and they're easy to remove.

-Layer height: 0.2 mm

-Filling density: 30%.

-Number of wall lines: 3 or 4

-Top and bottom layers: 4 or 5