20 BOTTLE - VALLEJO ARMY PAINTER PAINT RACK HOLDER, STANDALONE 4X5 - REMIX

This is my remix of a FREE STL file here on Cults3D, I originally only wanted a 12 pot version, but some have asked me to remix the original 4x4 to a 4x5 aswell.

I've extended the back and the front legs even more to compensate for a potential tip over when fully stacked with paint bottles.

This model still fits on my Elegoo Mars 3 Pro print bed.
(Do not scale the model down to fit your bed, as the bottles wont fit in the holes if you reduce it)

a) It can and has been printed without any supports, however if your worried it'll come off the resin build plate, perhaps add some heavy support attached at the rear on each circle area.

(Ive updated the download section to include an Extra Support Version upto the 2nd level of paint holders) or you can add your own using the original unsupported stl :)
b) paint bottles can be stored head down or up at all positions

Original FREE file from Cults member SLANJONOK
https://cults3d.com/en/3d-model/art/improved-jet-another-vallejo-paint-holder-standalone-version-4x4

My top bottle paint colour swatch cap design is available in my Cults Design collection too....if you were wondering ;)

Model weighs an est. 71 grams

Resin Printers

Can be printed base flat right on the bed, no supports needed. (however i'd recommend you increase your base layer burn in time to 30 sec + to help it stay stuck there)

Filament Printers

Print with the base flat to the bed, no supports needed.