Angle protractor from 90° to 180

By-what with a protractor you can reproduce any angle of 180° but as soon as you have to measure an angle between 90° and 180° in a room where nothing is normal I made my solution.

Here is for you a protractor to calculate the angles between 90° and 180°.

It can be useful for you to calculate an angle between two walls to cut lino for example or tiles, to calculate your furniture etc.

Upcoming changes:

• Addition of a top rail at the boom to better stabilize it ;

• Highlighting the lines more prominently every 5° ;

• Added a buffer below the handle to avoid having a height offset at its level (because of the protractor base (so I would have to drill the base too) ;

• Enlarged the pivot which I think is thin and sensitive in the long run (it's a printed and glued button with just a little drop of superglue).

I'm selling the model simply because it comes from my imagination following a real need and I dug a little to draw it finally because I want to create my business in the field of 3D and a little support will always be welcome ;)

PLA Form Futura Black & White

Without supports

20% (just for the handle, 3 perimeters)

M600 for color changes

(I printed with the basic PLA settings in Prusa Slicer)

Pivot button fixed with a small drop of superglue (modifications to come to increase its size and strength, see description) .