Euoplocephalus from the makers of Dr Fluff
Euoplocephalus from the makers of Dr Fluff
Published 2014-09-25T13:16:02+00:00
Dr Fluff's Robot Factory, a FREE mobile app for mobile that lets anyone create their own models for 3d printing. https://play.google.com/store/apps/details?id=com.thinkerthing.drfluffsrobotfactoryfree
Euoplocephalus is one of the largest herbivorous dinosaurs, living during the Late Cretaceous of Canada. Euoplocephalus was about five to six meters long and weighed over two tons. Its body was low-slung and very flat and wide, standing on four sturdy legs. Its head had a short drooping snout with a horny beak to bite off plants that were digested in the large gut. Like other Euoplocephalus was largely covered by bony armor plates, among them rows of large high-ridged oval scutes. The neck was protected by two bone rings. It could also actively defend itself against predators like Gorgosaurus using a heavy club-like tail end.
Print at 00.2 mm layer height, with 25% infill. This takes 355 minutes and uses 57.6g of filament.
Date published | 25/09/2014 |
Time to do | 355 - 355 minutes |
Material Quantity | 57.6 g |
Dimensions | 58 x 79 x 127 mm |
Complexity | Easy |
need some polishing ,after remove the support