iPhone6 case

New June 16, 2018(iphone6s_case_107_1piece.stl...)

This is a iPhone6 case with colorful numbers at back side.
Since ditches and gaps are arranged effectively, it fits your iphone6 well. See cross sectional view.

Variations

"xxx_top.stl" and "xxx_top.stl" are separated version for small printer users like me.

"xxx_1piece_plain.stl" is plain version which does not have ditches of number, so you can place your design here.

Printer:

m200 (hand made)

Resolution:

width 0.28 mm, thickness 0.14 mm

Infill:

30%

Notes:
Print conditions

___common
Printer name: hand made, m200
Slicer: Simplify3D
Firmware: Repetier

Jerk: 15
Acceleration: 1600mm/sec^2

Print time: 8 hours total

___for PETG
Filament: ColorFabb PETG
Nozzle: 0.25mm stainless
Print width: 0.28mm
Layer height: 0.14mm
Injection ratio: normal
Retraction length: 0.90mm

Layers: top 5, bottom 4, side 3
Infill: 30%
Skirt: 5 turns, 0.5mm gap
Support: 20%, 75% for top and bottom 3 layers
Raft: none

Temprature: 250 C

___for CFR-PETG
Filament: FormFutura CFR-PETG
Nozzle: 0.25mm stainless
Print width: 0.28mm
Layer height: 0.14mm
Injection ratio: normal
Retraction length: 0.75mm

Layers: top 5, bottom 4, side 3
Infill: 30%
Skirt: 5 turns, 0.5mm gap
Support: 20%, 75% for top and bottom 3 layers
Raft: none

Temprature: 255 C