Skip to content

Remix model test "kickstarter-autodesk-3d-master" that eliminates unnecessary difficulties by conucting the test .

ksr_fdmtest_v4-Ladnik-01.JPG Remix model test "kickstarter-autodesk-3d-master" that eliminates unnecessary difficulties by conucting the test .
ksr_fdmtest_v4-Ladnik-02.JPG Remix model test "kickstarter-autodesk-3d-master" that eliminates unnecessary difficulties by conucting the test .
ksr_fdmtest_v4-Ladnik-05.JPG Remix model test "kickstarter-autodesk-3d-master" that eliminates unnecessary difficulties by conucting the test .
ksr_fdmtest_v4-remixLadnik.STL Remix model test "kickstarter-autodesk-3d-master" that eliminates unnecessary difficulties by conucting the test .
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.3k views
  • 8 likes
  • 246 downloads
License
3D design format
STL Folder details Close
  • ksr_fdmtest_v4-remixLadnik.STL

Learn more about the formats
Last update 2018-12-10 at 22:49
Publication date 2018-09-26 at 20:12
Design number 33238
3DLadnik

3DLadnik

3D printer file info

3D model description

This test is interesting in quantifying the printer's capabilities. The test was carried out twice.
Test number 1 was performed with the following settings:

  1. Material - ABS is unpainted from # 3DPlast.
  2. The diameter of the nozzle is 0.3 mm.
  3. The height of the layer is 100 ΞΌm.
  4. The printing temperature is 240 degrees C.
  5. The default speed is 40 mm/s.
  6. The speed of the outer perimeters is 20 mm/s.

Based on the results, a score of 27 out of 30 was obtained.
In the course of the test, the peculiarity of the construction of the test platform 2 (the accuracy of the plastic feed) was revealed, which affects the printing, but does not affect the evaluation of the test. It turned out that the features of the model do not allow the S3D Slicer to properly work the platform base, which causes the perimeter to sag (especially when printing with relatively thin layers) and the reset of some of the loops of the supporting surface formed on it. ​
To eliminate unnecessary complications during the test, necessary changes were made to the model geometry.

Then, after installing the nozzle with diameters of 0.4 mm and increasing the height of the layer to 200 ΞΌm, another test was performed (number 2). Based on the results, an estimate of 25.5 out of 30 was obtained.

References: https://3dladnik.wixsite.com/portfolio/fdmtestv4-en
Printed on 3D Printer Lad-1.0: https://3dladnik.wixsite.com/portfolio/lad-1-0-en

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.