Batman Utility Belt - 1989 Replica

A recent customer request, a Replica 1989 Batman Utility Belt. This is definitely going to complete any Michael Keaton Batman costumes out there. It was a great success and I am definitely excited with how it turned out.

You'll need to print:
1x Buckle (adapted from: https://www.thingiverse.com/thing:642896)
1x Spacer
2 x Belt

You can use the belt portion for whichever side you chose, it is symmetrical around the buckle and the spacer ensures it fits well around the buckle. I know, the belt is not complete (i.e. full circle). However, you'll notice in the STL files that I have added a 5 mm ring slit behind the bullets to accompany a strap to complete the belt. I did this for 2 reasons: (i) it can fit anyone now; and (ii) you wont see the back if you are wearing a cape!

If you plan on wearing this (because, why the heck not), you need to print the belt pieces in a flexible filament. I used flexible PLA as it maintains is structure but is bendable along its top/bottom surface. Great for this type of use.

If you want one for yourself, message us :) we offer affordable 3D printing solutions throughout Canada.

Also, check out our other work at http://r3dprinting.ca

If you make one, please post it under 'Made'

"It's not who I am underneath, but what I do that defines me"

Printer:
TronXY P802MA

Rafts:
No

Supports:
No

Resolution:
0.1

Infill:
25-30%

Notes:
Print the belt in flexible filament if you wish to wear it!