Skip to content

Turboprop Engine, for Business Aircraft, Cutaway

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 35.4k views
  • 55 likes
  • 56 downloads
  • 1 collection
License
3D design format
STL and ZIP Folder details Close
  • 12-Imp-Spacer-03-01.stl
  • 1st-Diff-Duct01.stl
  • 1st-Diff-Duct02.stl
  • 1st-Imp-Shrd01.stl
  • 1st-Impeller01.stl
  • 2nd-Impeller01.stl
  • Assy-Charts01-3.zip
  • Assy-Manual-TPE02.zip
  • C-Chamber101.stl
  • Comp-Case01ws.stl
  • Comp-Turb-Spacer101a.stl
  • Comp-Turb-Spacer101b.stl
  • Diaphram-Frt101.stl
  • Diaphram-Rr-Plate01.stl
  • Diaphram-Rr201ws.stl
  • Dummy-BRG-10-6-01.stl
  • Dummy-BRG-12-6-01.stl
  • Dummy-BRG-5-25-01.stl
  • Dummy-BRG-5-5-01.stl
  • Dummy-BRG-5-5F-01.stl
  • Exh-Duct-Cap01ws.stl
  • Exhaust-Duct201ws.stl
  • Front-Case01ws.stl
  • Front-Cover01.stl
  • Fuel-Nozzle01.stl
  • GEAR48-Spacer01.stl
  • Gear-Carrier01.stl
  • Gear-Carrier01a.stl
  • Gear-Carrier02.stl
  • Gear-Sun01.stl
  • Gear10-03-05-01.stl
  • Gear12-03-05-01.stl
  • Gear36-Hub01ws.stl
  • Gear36-Ring01.stl
  • Gear48-03-12-101.stl
  • HSP-Coupling201.stl
  • HSP08-05-01.stl
  • Input-Housing101ws.stl
  • Parts-List001.zip
  • Plenum-Case101ws.stl
  • Prop-Blade101ws.stl
  • Prop-Hub101.stl
  • Prop-Shaft-Stop01.stl
  • Prop-Shaft01.stl
  • Prop-Spinner102ws.stl
  • Prop-Spinner201.stl
  • Stand-Front01.stl
  • Stand-Rear01.stl
  • Torque-Sensor01.stl
  • Transition-Liner101.stl
  • Turbine-Case101.stl
  • Turbine-Rotor01ws.stl

Learn more about the formats
Last update 2024-03-06 at 01:32
Publication date 2017-11-28 at 02:05
Design number 17643
konchan77

konchan77

3D printer file info

3D model description

This is a model of the Turboprop Engine for Business Aircraft, etc.
Engine of this class has many features other than the large size jet (fan) engine.
- Smaller size
- Higher RPM
- Lighter weight
These features make the complex air flow and configuration.

There are two types of this class engine;
- Direct drive
This cutaway model is the direct drive type.
- Free turbine

Features of this model are;
①. Integral-type Reduction Gear Box with an Air Intake
②. High Ratio Reduction Gears (including Planetary)
③. 2 stages Centrifugal Compressor (Impeller)
④. Reverse Flow Combustion Chamber
⑤. Axial stage Turbine
⑥. For the bearings (BRG), the printable dummy BRG are prepared to reduce cost instead of the metal ball bearing.

Download files includes;
-files: STL Files (44 items)
STL file name: "ws" of last 2 digits means "With Support" which special designed.
-images: Parts Breakdown for assembly Aid
-Excel (Zip) File: Parts List

Purchase Parts Information;
-Aluminum Tubes
See Parts List

-Screws
Micro screws M1.4x3.5L - Appox. 45 ea - Direct screw-in to 1 mm dia hole (No nut)
Screws M2 x ** - See Parts List

Assembly Points
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.
- If you want to clarify the air flow passage, the back side surfaces are painted before glueing and/or assembly.(See Photos)

Total Net Print Time: Approx. 40HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Especially, Input-Housing101ws.stl needs about 10 hours to print.
Note: When at actual print, each parameter may be adjusted by your experience.

I do hope your success!!

[Update 2017.12.15]
For "Dummy Propeller Assy", related STL files (4), photo and image are added.
[update 2018.07.12]
Revised Description only.
[update 2022.02.18]
Prop-Shaft-Stop01 added
assy-chart01-2 added
[update 2024.03.06]
assy-chart01-2 deleted and assy-acharts01-03 added to correct typo error.
assy-manual-TPE02.zip newly added.

3D printing settings

3D printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
But the parts having gear, small shaft and thin portion: 100% infill is recommended.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.