Chess set / Chess set

This is another chess set with its board. In PDF file, you will find all the information you need to print and assemble this chess set.

I designed this piece myself with the idea to create originals ones. The board dimensions are 40x40 centimeters, if you think it's too small / tall you can resale it in your favorite slicer;)

 You will need support for the knight nose. For the other pieces, no support is needed.

Here is another chess game with his board. In the PDF file you will find all the information you need to print and assemble this chess game.

I drew all these pieces making them original. The board is 40x40 cm, if you find it too small or too big, you can obviously resize it in your slicer.

You can fallow me on:

=> Twitter: @ OC3D4Print (https://twitter.com/OC3D4Print)

=> Facebook: https://www.facebook.com/oc.printing.10

I designed this piece myself with the idea to create originals ones. The board dimensions are 40x40 centimeters, if you think it's too small / tall you can resale it in your favorite slicer;)

 You will need support for the knight nose. For the other pieces, no support is needed.

I printed this game with a DAGOMA DISCOEASY 200; layer height: 0.1mm; infill: 17% with CURA.

The impression of the pieces is done without support, except for the rider, or the supports are necessary for the muzzle.

I printed this game with a DAGOMA DISCOEASY, with a layer height of 0.1 mm and a filling of 17% using the CURA software.