Skip to content

Geared Extruder

61e82583bd4f99ba63e6fb8f69521a49_preview_featured.jpg Geared Extruder
1ecd7780282e67b8492ff257ed02e0c2_preview_featured.jpg Geared Extruder
5a440be3cb82e62193a010e8a69ab07b_preview_featured.jpg Geared Extruder
94019c6c156a1053f20fe0fbde64b6d2_preview_featured.jpg Geared Extruder
418715ca8a3e333c43494f3b3bbec44a_preview_featured.jpg Geared Extruder
big_gear_with_patern.stl Geared Extruder
big_gear.stl Geared Extruder
filament_guide.stl Geared Extruder
filament_pressure_bar_holder.stl Geared Extruder
filament_pressure_bar_partA.stl Geared Extruder
filament_pressure_bar_partB.stl Geared Extruder
gland_nut_bracket.stl Geared Extruder
little_gear.stl Geared Extruder
main_body.stl Geared Extruder
tension_knob.stl Geared Extruder
universal_bracket_4mm.stl Geared Extruder
universal_bracket_8mm_4mm_bore.stl Geared Extruder
universal_bracket_8mm.stl Geared Extruder
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.5k views
  • 3 likes
  • 53 downloads
License
3D design format
STL Folder details Close
  • big_gear.stl
  • big_gear_with_patern.stl
  • filament_guide.stl
  • filament_pressure_bar_holder.stl
  • filament_pressure_bar_partA.stl
  • filament_pressure_bar_partB.stl
  • gland_nut_bracket.stl
  • little_gear.stl
  • main_body.stl
  • tension_knob.stl
  • universal_bracket_4mm.stl
  • universal_bracket_8mm.stl
  • universal_bracket_8mm_4mm_bore.stl

Learn more about the formats
Publication date 2018-02-07 at 15:13
Design number 20924
Job

Job

3D printer file info

3D model description

Geared Extruder

I wanted to make a new Extruder for an printer that I changed to an “bowden setup”.
My aim was to make it simple, strong and that the filament could be pressed super hard against the driver gear. Filament can be guided with a adjustable guide. For now I kept the gland nut(experimental), but included parts that can be adjusted for regular Teflon tube holders. On the printer on the pictures the gland nut works really well. This extruder en tube setup has made the print test of 20 hours. But on another printer of mine the gland nut works not so good. It's because that one prints with much higher speeds (60mm/s and higher) and than the gland nut does not hold so good anymore. I found that it does help to put Katon tape one the tube :-) I am still experimenting with other tube holder methods :-)
The little filament driver (11mm diameter) is mounted on an M8x50mm bolt I had lying around. On the lathe I turned the end of this M8 bolt down to 5mm so the driver can be mounted on it. See pictures
The model is made for 1,75mm Filament . For 2,85mm & 3mm Filament the holes need to bored out to the correct size.

If you have any questions feel free to ask

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.