Space Invaders Fleet Generator
Space Invaders Fleet Generator
Published 2017-08-23T13:59:51+00:00
Hi!
This one is something classic.A 8 bits invaders generator.
With Customizer you can create a full fleet ready for print in one file.
As a random generator, it depends of a numeric seed (up to 19 digits). Every seed creates different invaders.
Try different seeds until you get a nice one!
Each generation produces three files: The 'invaders', a base or support that fits, and a third file with invaders and base together.
Recomended: Flow Calibrator (http://www.thingiverse.com/thing:1662342) to ensure the invaders fits in the support.
Some examples and info about customization in images below.
Also added the 3 STL's used in printing tests (seed=123).
Have fun!!
Printer : BQ Prusa i3 Hephestos
Rafts : Doesn't Matter
Resolution : 0.2
Infill : 10%-20%
Notes :
Tested with PLA.
NO SUPPORTS !!!
Infill acts as inner supports avoiding holes in top of figure. Recomended a 10% or 15%
The size of every 'pixel' is 5mm. Height of base is 5mms and has a flat bottom of 1 mm Due to 1mm bottom, invaders are 4mm height
Date published | 23/08/2017 |
Technology | FDM |
Complexity | Easy |