Batman Begins Utility Belt
Batman Begins Utility Belt
Published 2015-04-20T14:01:49+00:00
This is my non-accurate but hopefully quite close representative design of the utility belt from Batman Begins. It prints fairly well, and the idea is that people can print this and have a good basis to work from to create their own belt - it will need post process work of course, as that is true for all prints.
The idea is to acetone bond the pieces (back and front in some cases) together after printing which allows better detail on each section. Print at 0.2mm with medium to high density for a good balance of accuracy and speed on the print. I printed this in ABS to ensure that the small links would be strong enough to hold each other up once clipped together.
Print at 0.2 mm layer height, with 10% infill. This uses 151g of filament and takes 10 hours and 22 minutes.
Date published | 20/04/2015 |
Time to do | 600 - 620 minutes |
Material Quantity | 151g |
Dimensions | 94 x 225 x 25mm |
Complexity | Difficult |