pencil pot, toothbrush pot, snail

This is Stanley, the funny snail... in its shell you can place a standard or printed plastic cup (cup file provided with Stanley...). In this way, Stanley can be transformed into a pencil pot (for the office), a toothbrush pot (for the bathroom) or a flower pot (for decoration!). It's the way you prefer!

PLA (Creality CR-10s) :

For nozzle diameter 0.40 mm

Extrusion multiplier: 0.95

Extrusion width: 0.40 mm

Retractable distance: 6.50 mm

Additional restart distance: - 0.20 mm

Vertical retraction lift: 0.25 mm

Retractation speed: 80 mm/s

Disengagement distance: 0.20 mm

Main layer height: 0.18 mm

Top solid layers: 4

Lower solid layers: 4

Contour shells: 3

Percentage of filling: 8%.

Contour overlap: 20%.

Supports the percentage of filling: 20%.

Substrate base layers: 2

Media type: normal

Support pillar resolution: 4 mm

Maximum overhang angle: 45° (can be increased to 60°)

Extruder temperature: 225°C

Heating bed (optional): 60°C

Printing speed: 50 mm/s

Under contour speed: 50%.

Under solid filling speed: 80%.

Under speed of the support structure: 80%.

ABS (Creality CR-10s) :

For nozzle diameter 0.40 mm

Extrusion multiplier: 1.05

Extrusion width: 0.48 mm

Retractable distance: 6.50 mm

Additional restart distance: - 0.15 mm

Vertical retraction lift: 0.30 mm

Retractation speed: 50 mm/s

Disengagement distance: 0.20 mm

Main layer height: 0.18 mm

Top solid layers: 4

Lower solid layers: 4

Contour shells: 3

Percentage of filling: 8%.

Contour overlap: 20%.

Supports the percentage of filling: 20%.

Substrate base layers: 2

Media type: normal

Support pillar resolution: 4 mm

Maximum overhang angle: 45° (can be increased to 60°)

Extruder temperature: 240°C

Heating bed: 105°C

Printing speed: 45 mm/s

Under contour speed: 75%.

Under solid filling speed: 80%.

Under speed of the support structure: 80%.