3D model description
Note: the model is available for free here. If You want to support this work, consider leaving a tip.
Note: the model is also available for free on thingiverse. You can buy it here only if You want to support this work, or "buy" me a beer for it ;)
https://www.thingiverse.com/thing:3457842
Fire truck toy I designed and printed for my son.
Print with a machine that handles tolerances of 0.3-0.4 mm, if it doesn't, things won't fit together, and the ladder peaces will most probably stick to each other. Print the screws and dies with a layer not thicker than 0.16mm (did not try a coarser one, so no guaranty that it will work...), I recommend 0.12mm.
Print list - quantity - stl file name - used collor - observation:
* 2x - die_connection_69p6mm_r6p7.stl blue III as it is no support
* 1x - front_grill.stl black I turn 90 deg over Y no support
* 1x - back_top.stl yellow I as it is no support
* 1x - back_grill_lights.stl red I turn 90 deg over Y no support
* 1x - ladder_base.stl red I as it is with support
* 1x - ladder_in_out.stl white I upside down with support
* 1x - cockpit.stl black I as it is with support
* 1x - trunk_stairs.stl red I turn 180 deg over Y with support
* 1x - cabin.stl red I turn 90 deg over Y with support
* 1x - seats_2_rows.stl black I as it is no support
* 1x - side_left.stl white I turn 90 deg over X no support
* 1x - side_right.stl white I turn 90 deg over X no support
* 2x - wheel_axle_100mm_r5p5.stl black II as it is no support
* 3x - die_connection_69p6mm_r5p5.stl blue III as it is no support
* 4x - screw_ladder_base.stl yellow IIII as it is no support
* 6x - screw_20mm_filet_10mm_full.stl yellow IIIIII as it is no support
* 4x - screw_20mm_filet_10mm_full.stl white IIII as it is no support
* 4x - screw_27mm_filet.stl black IIII as it is no support
* 2x - fire_truck_roof_light.stl blue II as it is no support
* 2x - roof_light_LEFT_HAND.stl blue II as it is no support
* 1x - fire_truck_roof_light.stl red II as it is no support
* 1x - roof_light_LEFT_HAND.stl red II as it is no support
* 2x - fire_truck_roof_light.stl white II as it is no support
* 2x - wheel_left.stl black II as it is with support
* 2x - wheel_right.stl black II as it is with support
* 4x - wheel_cap.stl white IIII as it is no support
* 1x - lader_axle_72mm_r5p5.stl white I as it is no support
* 2x - front_light.stl blue II turn 90 deg over Y no support
For the assembly steps check the photos.
Hopefully I did not miss any stl files, if I did, leave a comment.
Update 31.03.2019:
Some adjustments to the long/big parts such that the model can be printed on smaller beds (20x20cm).
1. I splited the side parts in two and connected them with two small screws.
- Therefore do not print:
* 1x - side_left.stl white I turn 90 deg over X no support
* 1x - side_right.stl white I turn 90 deg over X no support
- But print these instead:
* 4x - screw_small_l12mm.stl any IIII as it is no support
* 1x - side_left_back.stl white I turn 90 deg over X with support
* 1x - side_left_front.stl white I turn 90 deg over X no support
* 1x - side_right_back.stl white I turn 90 deg over X with support
* 1x - side_right_front.stl white I turn 90 deg over X no support
2. I cut the ladder to be shorter (220mm) such that it can be printed on a 20x20cm bed diagonal.
- Therefore do not print:
* 1x - ladder_in_out.stl white I upside down with support
- But print these instead:
* 1X - ladder_short_220mm.stl white I upside down with support
3D printing settings
The longest peace is 29cm, so You need a printer with a big enough bed (I have a creality cr10-mini with a 22x30cm bed...).
Most peaces can be printed without support, the list with what to print and how is in the descriptions. For questions, just ask in the comments.