Destiny Thorn Handle Split
7,995
views
719
downloads
4
collections
2 comments
Loading comments...
Destiny Thorn Handle Split
3D
Published 2015-02-18T19:53:14+00:00
27
2
Add to Collection
Description
This is a modified version of the handle from Kriby Downey's excellent Thorn Hand Cannon model, from the game Destiny. I had problems printing the handle because of the complex geometry and overhangs. Supports just didn't do the trick, so I split the handle along the long axis, allowing it to be printed in halves. Once the halves are glued together they still jigsaw into the remainder of the model as intended. I hope this modification helps folks who are having the same problem that I did!
Printing Details
Print at 0.2 mm layer height, with 10% infill. This uses 49 g of filament and takes 248 minutes.
Technical Information
Date published | 18/02/2015 |
Time to do | 248 - 258 minutes |
Material Quantity | 49 g |
Dimensions | 86 x 104 x 50 mm |
Complexity | Very Easy |
More Information
Object Parts