Designed by
aashooter
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Gun Hanger is designed to display any type of handgun flat on the display surface. There are three lengths to accommodate different type and size of pistols and revolvers. Paddle can provide support at the grip or under the barrel depending on the CG of the handgun. I use it for rifles as well, however a support is needed to carry the weight of the barrel; three lengths of support are provided.
Body has a second screw hole on the support pad; this is provided to ensure body will not rotate under load. Your handgun is actually supported by the main screw in the center so make sure it is well fixed on the display surface.
Design Files
File Size
Paddle - Medium.stl
152 KB
Gun Hanger V2 - Support 60mm.stl
146 KB
Paddle - Long.stl
156 KB
Body - Short.stl
228 KB
Gun Hanger V2 - Support 50mm.stl
155 KB
Paddle -Short.stl
143 KB
Gun Hanger V2 - Support 40mm.stl
161 KB
Body - Long.stl
227 KB
Cap.stl
140 KB
Lock Pin.stl
138 KB
Body - Medium.stl
228 KB
Comments