ATTENSHUN - Redfox displays her medals! - by SPARX

ATTENSHUN . . "Redfox displays her medals! ". . its raining, Redfox needed some clothes designing , also my resin printer is waiting a new board . . so I need a file to fill the build plate of the Photon in one piece. This is not my normal printing method in one piece but you never know till you try . . its a little bit smaller than my normal 1/6th scale but only 15% smaller . .
you can increase by 15% without damage to model and will print at correct scale . .

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

No Instructions with this one as All of the parts are orientated to print base ready to print with your favourite slicer . .

The arm/shoulder R and the number 1 are cutouts exposing flesh . . just so you know . .
This has not been printed as yet as was intended for resin printer, have to wait its bust! . .so if you find anything wrong . .let me know .
Back in 1982 Redfox was developed as a platform game on the Atari/amiga platform . . Remember them? 16 colours 320x200 resolution . . well I happened to come across some of my tryouts and unused game concepts as in the screen loader images above . . sadly it never made it as considered too risky! Remember these where created in 16 colours hence the pixalation . . we are spoilt today my fellow artists!
Redfox was inspired by the likes of Carrie and Connie from Mayfair magazine, she is a Barbarella type female with misadventure and extremely bad luck in keeping her clothes on . .
I hope you like the resurrection of Redfox the character and would like to follow and make her adventures for your own collections . .
Check out the full diorama on Cults . . https://cults3d.com/en/3d-model/naughties/attack-of-the-penisaurus-redfox01-by-sparx

Recently I have been asked “why this is not printing? “ Or “This is full of holes when printed?” Etc. . . please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collection but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .

orientated for resin . . but scale up by 15% and will print on FDM with supports