Skip to content

Turbojet Engine, 1st Generation, Double-Sided Impeller type

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 7.5k views
  • 18 likes
  • 8 downloads
License
3D design format
STL and ZIP Folder details Close
  • Accy-GB-Hsg01ws.stl
  • Assy Manual-TJE02-01.zip
  • CC-Assy-Cut401ws.stl
  • CC-Clamp401.stl
  • CT-Case-In101ws.stl
  • CT-Case-Out-Cut101ws.stl
  • Diffuser-Hsg-Cut101ws.stl
  • Exh-Case-Cut201ws.stl
  • Exp-Duct-Cut-Cut201.stl
  • Exp-Duct201.stl
  • Flame-Tube01.stl
  • Imp-Half-Frt01.stl
  • Imp-Half-Rr01.stl
  • Imp-Shroud-Back-Frt01.stl
  • Imp-Shroud-Back-Rr01ws.stl
  • Imp-Shroud-Fwd-Frt01ws.stl
  • Imp-Shroud-Fwd-Rr01.stl
  • Imp-Shroud-Jig01.stl
  • Inlet-Hsg-Back-Cut201ws.stl
  • Inlet-Hsg-Fwd-Cut201ws.stl
  • Rotate-Tool02.stl
  • Rotate-Tool04.stl
  • Rotate-Tool103.stl
  • Stand-Frt-Base01.stl
  • Stand-Frt01.stl
  • Stand-Rr01.stl
  • Turb-Cool-Scoop01.stl
  • Turb-Nozzle01.stl
  • Turb-Wheel01.stl
  • Turb-Wheel02.stl

Learn more about the formats
Last update 2019-08-16 at 04:51
Publication date 2019-08-13 at 07:34
Design number 68876
konchan77

konchan77

3D printer file info

3D model description

This is an imaginary model of the first-generation jet engine that greatly contributed to the real operation of jet engines in the 1940s and 50s.
It is the unique engine that has the structure that is no longer seen today, and that allows you to know the efforts of pioneers at that time.
This type of engine has been used for jet training aircraft for about half a century.

A. The design point of this model;
① Double-sided Centrifugal Compressor (impeller)
② Inlet case with guide vane
③ Duct type diffuser
④ Can type combustor - 12 cans (There is the actual engine having 14 cans)
Outer cans are combined as a assembly because ease to printing and assembly.
⑤ Turbine - Axial single stage
⑥ Turbine cooling system using "Ambient ram air"
⑦ Front accessory gearbox

B. Assembly Manual (PDF format, total 16 pages)
The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)".

C. Purchase Parts Information;
-Aluminum Tubes
See Parts List
-Screws
Micro screws M1.4x3.5L & M1.4x6L - Direct screw-in to 1 mm dia hole (No nut)
But if you have the M1.4 Tap, it will be very useful.
Screws M2 x ** - See Parts List

D. STL file
Total STL files are 29 items including the stand and tools.
“ws” of last 2 digits of file name means “With Support” special designed.

E. Total Net Print Time: Approx. 51HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.

F. Printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.

I do hope your success!!

3D printing settings

See above.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.