Skip to content

TT Furious

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.7/5 (89 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 315k views
  • 2.9k likes
  • 18.2k downloads
  • 13 collections
  • 8 comments
  • 1 make
License
3D design format
PDF, SLDPRT, STL, and ZIP Folder details Close
  • 2x1mm Bearing Spacer.SLDPRT
  • Base Drive Cover2.STL
  • Base Drive Inner Disk.STL
  • Base Drive Outer Ring a.STL
  • Base Drive Outer Ring b.STL
  • Base Drive Outer Ring.STL
  • Base Drive Plate.STL
  • Base Drive.STL
  • Furious Build Notes.pdf
  • Furious EASM.zip
  • Furious_Stepper.zip
  • Jewel 11mm.STL
  • Jewel 6mm.STL
  • L1 Balance Shaft - Copy.STL
  • L1 Balance Shaft 2.STL
  • L1 Balance Shaft 3.STL
  • L1 Balance Shaft.STL
  • L1 Balance Spacer.STL
  • L1 Balance Spring End Mount.STL
  • L1 Balance Spring.STL
  • L1 Balance Wheel.STL
  • L1 Bearing Spacer Lower.STL
  • L1 Bearing Spacer Upper.STL
  • L1 Escape Wheel 3.STL
  • L1 Fork 2.STL
  • L1 Fork 3.STL
  • L1 Fork.STL
  • L1 Frame Base Alignment Pin.STL
  • L1 Frame Base Bridge Inner.STL
  • L1 Frame Base Bridge Main.STL
  • L1 Frame Base.STL
  • L2 Cap Screw.STL
  • L2 Counter Weight Cap.STL
  • L2 Crown Bearing Washer.STL
  • L2 Drive Gear.STL
  • L2 Lower Body Trellis2.STL
  • L2 Lower Body.STL
  • L2 Shaft Spacer 2.STL
  • L2 T25 M2 3mm Gear.STL
  • L2 Thrust Bearing Washer.STL
  • L2 Torque Spring Washer.STL
  • L2 Torque Spring.STL
  • L2 Upper Body Loading Plate Lower.STL
  • L2 Upper Body Loading Plate Pin.STL
  • L2 Upper Body Loading Plate Upper.STL
  • L2 Upper Body.STL
  • L3 Bearing Holder.STL
  • L3 Bearing Race Guide.STL
  • L3 Bearing Race Inner a.STL
  • L3 Bearing Race Inner b.STL
  • L3 Bearing Race Inner.STL
  • L3 Bearing Race Lower.STL
  • L3 Bearing Race Upper.STL
  • L3 Crown Gear a.STL
  • L3 Crown Gear b.STL
  • L3 Crown Gear.STL
  • L3 Frame Ring Gear.STL
  • L3 Frame Support.STL
  • L3 Frame.STL
  • Screw 12mm w screw hole.STL
  • Screw 12mm.STL
  • Screw 20mm.STL
  • Screw 7mm End Cap.STL
  • Screw 9mm Seat.STL
  • Screw 9mm w screw hole.STL
  • Stepper Pinion.STL

Learn more about the formats
Last update 2023-04-09 at 03:18
Publication date 2019-08-21 at 16:05
Design number 69897
mcmaven

mcmaven

3D printer file info

3D model description

4/8/23
One of the bearing holes for in the L1 Escape Wheel was undersized.
I posted an L1 Escape Wheel 3.STL file that corrects this error.

1/21/21
FYI, To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here.

11/25/20
I uploaded a zipped EASM file of the whole Furious assembly. With an EASM Viewer, you can rotate the assembly in 3D space, highlight individual parts, do blowups, etc. Hopefully the file will answer some of the assembly questions that the Build Notes do not. Please message me if you found this way of documenting the design useful, or if you didn't. Thanks!

You can download a free EASM viewer here. You need to 'register' to download the viewer but Solidworks doesn't bother you with emails. And there are other free viewers available if you want..
https://www.solidworks.com/sw/support/edrawings/e2_register.htm

11/19/20
I'm pleased to announce that MakerRx is now offering a kit of all the non-printed parts that you need to assemble the Furious, e.g. the Nano, the stepper and driver board, the shafts cut to length, ball bearings, etc.

After using their kit to assemble the Flathead V8, I contacted them about creating kits for my designs. I found the cost of their kits very reasonable, especially when you consider that in some cases you only need 2 or 3 screws of a particular size, but you have to order a minimum of 25 of each size, some parts are hard to find, and you have to pay shipping on each of the items that you order. Pulling all the parts together for a complicated make can get expensive and take a lot of time. And in several cases, the parts that I ordered didn't fit and I had to order different ones. The bottom line, is that if you do the math on ordering the parts yourself and including shipping, you will have a hard time beating their price.

You can order the MakerRx Furious kit here:
https://www.makerrx.com/products/twin-turbo-furious-tourbillon-kit

You can also talk to MakerRx about printing the Furious parts if you don't have a printer. I feel that their prices are very reasonable, especially when compared to a printing service like Shapeways.

11/16/19
Changed screw lengths to minimize stripping screws.
Posted new zip file (Thingiverse files 110519.zip) that includes updates to the following STL files:
L2 Lower Body
L2 Lower Body Trellis2
Base Drive Cover

11/5/19
Posted updates to the following STL files:
Base Drive Outer Ring a and b
Base Drive Plate
L2 Lower Body
L2 Upper Body
L3 Bearing Race a and b
L3 Bearing Race Lower

The files include changes to make assembly easier, e.g. changing dimensions to provide more clearance and reduce the need to sand or file parts to get them to work smoothly.

Also, use M2x4mm cap head screws to attach the stepper motor to the Base Drive Plate. If you use M2x6mm screws, they go through the Base Drive Plate, and rub against the L3 Bearing Race Lower part, preventing it from turning.

9/12/19
Updated Base Drive STL files. to include hole for shaft encoder.

I modeled this design after a Jacob and Co. Twin Turbo Furious watch. I spent many hours looking at videos and images that I found on the web of the original watch.

Similar to the Gyrotourbillon and the Triple Axis, I tried to make the model an accurate (scaled up) version of the original Furious tourbillon mechanism. I printed plastic screws to scale and used them as caps to cover the steel screws that actually hold it together.

This is a real-time video of it, https://youtu.be/2-7S2i6AUyM
Also it's quite large, with a diameter over 200mm.

In this design, I've included several versions of the Balance Shaft and the Fork which will give you some alternatives to get it to tick easier.

Please read the Overview in Build Notes to get a better feel for the constraints of this design.

I have other tourbillon and related designs at:
https://cults3d.com/en/3d-model/gadget/gyrotourbillon-jaeger-lecoutre-model

https://cults3d.com/en/3d-model/gadget/triple-axis-tourbillon

https://cults3d.com/en/3d-model/gadget/triaxial-quartz-movement-upgrade

3D printing settings

Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 1.5mm
Infill: 15%
Filament: PLA, Hatchbox Black and CC3D Silk gold, silver, and copper

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.