RC Car Trailer 1/10

This is a 1/10 scale RC trailer, the frame is in two pieces and is conjoined by a wooden platform. Cut wood to scale and glue/screw it in to the frame. Then choose what you would like to use to hold your wheels, I designed a 3D printed version of what I did on my personal trailer. (I have not printed or tried the 3D printed version) What I did was use a piece of wood that was 1/2 inch by 1/2 inch and drilled two holes (dimensions in the photos) After that I uses parts around the house to make the wheels spin freely. (Ideas in photos) Once I did that I made a hitch system, I personal found that a standard turnbuckle works best. I slightly drilled out the middle to make it easier to take on and off. For the hitch on the vehicle you can choose to buy a hitch system online or you can make one yourself. When making the hitch for the vehicle towing the trailer you can use any scrap pieces of material and attach the ball onto the end of it and it should work great. When I was done with all that I used Epoxy and filled in the outline on the bottom of the trailer to make sure that nothing would break or fall off.

(Its my first time publishing my design, please tell me if something doesn't work)

turnbuckle end (hitch)- https://www.amazon.com/Team-Losi-Turnbuckles-68mm-Ends/dp/B000H7CZBS/ref=sr_1_21?dchild=1&keywords=end+of+rc+turnbuckle&qid=1586561221&s=toys-and-games&sr=1-21

Wheels- https://www.amazon.com/ShareGoo-Wheel-Rubber-Touring-Racing/dp/B079LF4WWX/ref=sr_1_2?dchild=1&keywords=rc+onroad+wheels&qid=1586561582&s=toys-and-games&sr=1-2

GORILLA Epoxy