POLARIS REPRAP (Solar 3D Printer)

Summary

(English)

CONCEPTUAL PROTOTYPE.

Summary.

Summary of Knowledge.

Description and Operation:

The "Polaris RepRap" solar printer has a core that prints inside a photophoretic trap and opto-acoustic levitation of the sinterable material.

The impression is total and instantaneous, when the armor of negative curvature activates all coordinates volumetric orthogonal at once and these diodes are they polarize by becoming translucent when receiving voltage / light.

The external fuselage synthesizes the radiation coming from the Sun and transforms it into electrical energy. Also I know synchronize to enable or restrict the passage of light

solar towards the interior of the Nucleus.

With the energy captured by the gyroscopic fuselage, they start the electromagnets of the internal dynamo.

Everything in its structure is purely wireless, instead

Tesla Induction Coils, generators are used,transducers, inverters, multipliers, receivers and high frequency emitters.

The computer is purely mechanical; one logics gates code made with thermokinetic metamaterials and piezoelectric components operate your Central Processing Unit.

3D models are binary stereolithography.

The Instruction Set is functional. Memory contains the volumetric coordinate sequences to manufacture modular space stations, rovers, rangers, satellites, telescopes and small versions of itself.

All these structures are sintered quickly since the internal spaces are lattices. The concepts are from unfolding, telescopic, folding architecture, collapsible and with variable metamaterial topologies according to

thermal, optical, acoustic, elastic properties, compressible, kinetic or dynamic that are required in each

section and component of the sinterable models in the outer space through the Sun.

All prints are coated and post-treated with graphene / airgel / suitable resin.

The propulsion uses Coanda's Rings and Profiles in set with compression turbines and converging nozzles.

The POLARIS has an entire hive of ships Self-replicating Tetrahedrons from Reuleaux (a streamlined solid with constant width).

They are Modules equipped with measuring instruments, sensors, a laser defense system with radar and cannon

High power. Finally, an SLS printer module Integrated, with self-replicating capacity (RepRap).

(English)

CONCEPTUAL PROTOTYPE.

Summary.

State of Knowledge.

Description and Operation:

The "Polaris RepRap" solar printer has a core that

prints inside a photophoretic and levitation trap

opto-acoustics of the sinterable material.

The impression is total and instantaneous, when the shielding of

negative curvature activates all coordinates

volumetric orthogonal diodes at the same time and these

polarize and become translucent when receiving voltage/light.

The external fuselage synthesizes the radiation from the

Sun and transforms it into electrical energy. It is also

synchronizes to enable or restrict the passage of light

to the interior of the Nucleus.

With the energy captured by the gyroscopic fuselage, it

they set off the electromagnets of the internal dynamo.

Everything in its structure is purely wireless, whereas

Tesla Induction Coils, generators are used,

transducers, inverters, multipliers, receivers and

high-frequency transmitters.

The computer is purely mechanical; a door code

logic made with thermokinetic metamaterials and

piezoelectric components run your Unit

Central Processing.

3D models are binary stereolithography.

The Instruction Set is functional. The memory contains

the volumetric coordinate sequences for manufacturing

modular space stations, rovers, rangers,

satellites, telescopes and small versions of itself.

All these structures are quickly sintered as

the inner spaces are lattices. The concepts are

deployable/extendable, telescopic, foldable, collapsible architecture with variable metamaterial topologies according to the thermal, optical, acoustic, elastic, compressible, kinetic or dynamic properties required in each section and component of the models, sintered in outer space by the Sun.

All prints are coated and post-treated with

graphene/aerogel/suitable resin.

The propulsion uses Coanda Rings and Profiles in

set with compression turbines and converging nozzles.

The POLARIS has an entire hive of self-replicating ships in the shape of Reuleaux Tetrahedrons (a

aerodynamic solid with constant width).

They are modules equipped with measuring instruments,

sensors, a laser defense system with radar and

high power. Finally, an SLS printer module

integrated, self-replicating capability (RepRap).

|E. Mr. Renzi, Argentina

Thanks!!!

Printer:

STL 3D Printer

Rafts:

Doesn't Matter

Supports:

Doesn't Matter