ikuui80

Hello, here is a storage for an electronic cigarette and 3 liquids.

Printed on an a8 anet. Start by printing the "colour" file of the writing colour. Then, print the file "elec cigarette box", and pause just before the layer that covers the hole (see the photo of cura).

Integrate the colour into the hole and restart printing.

For owners of a multi-extruder printer, I have also created two files for you to have an integrated and smooth handwriting. WARNING. To be printed standing up, i.e. writing on the platen.

----------------------------------------------------------------------------------••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Hi, here is it a display for e-cigarette with 3 liquid storage.

Print on anet a8. Start printing "couleur.stl", that the color you want for the VAPE writing. Then, print the "boite cigarette elec", but make a pause before the layer were the hole was recovered (cf cura picture).

Put the "couleur" that you print before, inside the hole and relaunch the print.

For owners of multi extrud printers like A20M, I made two files for have integrated writing. I just advice you to print it "on stand", the writing on the bed.

-I set my default settings, but print well according to your machines. The important thing is the final result.

Nozzle temperature: 200°.

Bed T° : 60°.

Speed: 60 mm/s

----------------------------------------------------------------------------------••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Here are my print settings, but print with your own settings and experience, only the final result matters.

T° Nozzle: 200

T° bed : 60°.

Speed: 60 mm/s

Filaments used: Ice Blod blue, Ice Brave Black