Automatic Euro coin dispenser

Elastic version and spring version...

Are you tired of looking for your change at the bottom of your car pocket or your pants?

This dispenser is the perfect tool to store your change but more importantly to quickly make the top up you need.

Possible to place about 68 coins or 30€ of change.

8 coins of 2€ each

7 coins of 1€ each

7 pieces of 0,50€ each

8 pieces of 0,20€ each

8 pieces of 0,10€ each

10 pieces of 0,05€ each

10 pieces of 0,02€ each

10 pieces of 0,01€ each

The holes are printed tapped for easy screwing.

You need 5 M3 x 16 screws max and some rubber bands.

The rubber bands I used are my daughter's. You know, with which children made bracelets, rings and other ... The famous Rainbow (see pictures).

On the presentation photo, the golden pieces are the pushers trapped in the box.

2 different shapes will be downloadable, in total 12 STL files.

Dimensions: 116 x 57 - height 25 mm

Installation of the elastics...

It is better to put 2 elastics on the big Ø and 1 elastic but doubled on the 3 smaller Ø.

This allows a better push of the parts.

Video: https://youtu.be/hR17eEO9jMc

New version with springs :

Possible to place 63 coins or 27.42 € of change.

7 coins of 2€ each

7 coins of 1€ each

7 pieces of 0,50€ each

7 pieces of 0,20€ each

8 pieces of 0,10€ each

9 pieces of 0,05€ each

9 pieces of 0,02€ each

9 pieces of 0,01€ each

You need 5 screws M3 x 16 max and 8 springs Ø8,5 ext. and wire Ø0,5 height 25 mm

Video : https://youtu.be/vc_gZ6LvKIQ

All these files will be available, you just have to choose the one you want at home.

Only the cover requires supports for the screw head holes.

On the realized distributor :

Layer height : 0,2 - allow 0,1 or 0,15 for a better finish

Line width: 0.4

Number of lines in the wall: 3

Filling: 20%.

Printing speed: 60

Printing speed of the wall: 30

Detour mode: Not in the layer