YOSD 60mm Super Dollfie Head YH 01 - by SPARX

This file contains ONLY one head and cap . .YH01 – Monica doll face and expression.

Lots of files for sale and free of BJD dolls heads. Unfortunately, they are either very expensive or not scaled to fit smaller resin printers or specific dolls, like the 60mm Yo Super Dollfie.
This series of heads are designed to fit 115 x 65 x 155 resin build plate as well as FDM printers.
The heads are approx. 60-63mm neck to skull height, 40-42mm width of eyes, and at current scale are smaller than a BJD 1/3 doll size, but still use 18mm Eyes.
The neck fitting is designed for the 9-10mm Ball and has a surrounding socket of 14-15mm
You can scale them up or down to 1/6 doll size But eye and neck fittings WILL CHANGE!

Each head is very reasonably priced or free for the detail.

Each YOSD head is complete with a Head Cap even though these head caps will be universal to all YOSD heads.
YOSD doll cap heads WILL NOT FIT BJD 1/3 dolls heads

Heads are orientated for FDM and resin printers to use the least amount of supports as well as keep supports away from face. Please feel free to orientate them yourself . .
No Instructions with this one as All of the parts are orientated to print base ready to print with your favourite slicer . .

A SPECIAL THANKS TO Monica Bovee, who commissioned this head and allowed further sales, to other collectors.

All the parts have been printed and developed to print, A lot of prints have been produced to test design and fit. All heads have been fitted to dolls/painted etc without problems . .

All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collections and friends but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.

I SHARE MY WORK FOR OTHERS TO ENJOY. . .

orientated correctly . .or choose your own.
Supports needed.