Skip to content

Jet Engine Component (10-1): Air Starter, Axial Turbine type, Cutaway

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.5k views
  • 7 likes
  • 3 downloads
  • 1 comment
License
3D design format
STL and ZIP Folder details Close
  • Assy Manual-AS-Cut01.zip
  • Clutch-Inner101ws.stl
  • Clutch-Outer-Cut201.stl
  • Clutch-Outer-Cut202.stl
  • Dummy-BRG-6803-01.stl
  • Dummy-BRG-6807-01.stl
  • Dummy-BRG-6807-02.stl
  • Dummy-BRG-686-01.stl
  • Dummy-BRG-689-01.stl
  • Dummy-BRG-698-01.stl
  • Dummy-BRG-HK0509-01.stl
  • Exhaust-Duct-Cut01mws.stl
  • Gear-Housing-Cut01.stl
  • Gear-Housing-Cut02ws.stl
  • Inlet-Housing-Cut01ws.stl
  • Planet-Carrier-Cut101.stl
  • Planet-Carrier03.stl
  • Planet-Carrier102ws.stl
  • Planet-Gear-Cut01ws.stl
  • Quill-Shaft-Cut01.stl
  • Ring-Gear-Cut101ws.stl
  • Ring-Gear-HSG-Cut101ws.stl
  • Ring-Gear-RTNR01.stl
  • Ring-Gear-Sleeve-Cut01.stl
  • Ring-Gear-Sleeve-Cut02.stl
  • Rotate-Tool103.stl
  • Stand-Base01ws.stl
  • Turb-BRG-Hsg-Inner-Cut101.stl
  • Turb-BRG-Hsg-Out-Cut101ws.stl
  • Turb-BRG-Sleeve01.stl
  • Turb-Gear-RTNR-Cut01.stl
  • Turb-Gear-Spacer01.stl
  • Turb-Rotor-Gear101.stl
  • Turb-Rotor01ws.stl
  • Turb-Support-Cut01ws.stl

Learn more about the formats
Publication date 2020-05-10 at 04:39
Design number 145967
konchan77

konchan77

3D printer file info

3D model description

For “Mid” and “Large” class jet engine starting, the air turbine starter is used to reduce weight than electric starter (motor).
Air starter is driven by pressurized air supplying by APU or ground equipment.
There are “Radial” or “Axial” type of turbine. This is “Axial” type “Cutaway” model for the “Running” model.
https://cults3d.com/en/3d-model/tool/jet-engine-component-10-air-starter-axial-turbine-type
The features are as follows;
① Axial Turbine Rotor and Stator
② Two Stages of Planetary reduction gears (Reduction Ratio 10:1)
③ One-way Clutch (Simplified)
④ Output (Quill) shaft
⑤ Non metal bearings (Dummy:printable) are used.
⑥ This can be dis-assembled and assembled.
⑦ Color identification of parts in photo: White=Rotating Parts, Red= Bearing

"Over-speed Switch” and “Oil Pump”having by the actual Starter are eliminated for this model.

B. Assembly Manual (PDF format, total 15 pages)
The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)".
In order to make it rotate smoothly, careful eccentricity and gap adjustment are needed.

C. Purchase Parts Information;
- Bearings- Non metal bearings (Dummy:printable)
- Aluminum Tubes
φ3, 5 - See Parts List
- Screws
Micro screws M1.4x3.5L & M1.4x6L - Direct screw-in to 1 mm dia hole (No nut)
But if you have the M1.4 Tap, it will be very useful.
Screws M2 x ** -, M3 x ** - See Parts List

D. STL file
Total STL files are 34 items including the stand and tools.
“ws” of last 2 digits of file name means “With Support” special designed.

E. Total Net Print Time: Approx. 50 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.

F. Printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.

I do hope your success!!

3D printing settings

See above.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.