Shileld TV 2019 - Remote Control Protection

FR :

Protection for the remote control of the Nvidia Shield Tv 2019. The remote control is fragile and the rear cover can be easily removed after a few falls.

I hope to help you protect her with these coins.

2 models for the top of the remote control are available, as there seems to be an infrared port a hollow model is present to keep it, if you don't need it, try the full model.

Other things, the dimensions are very precise and the printers less, according to the printers, it will be necessary to print in 100% but for others in 97%, attention thus and make preliminary tests.

Flexible filament printing recommended!

EN :

Remote control protection for the Nvidia Shield Tv 2019. The remote control is fragile and the rear cover can be easily removed after a few falls.

I hope to help you protect it with these parts.

2 models for the top of the remote control are available, as there seems to be an infrared port a hollow model is present to keep it, if you don't need it, try the full model.

Another point, the dimensions are very precise and the printers less, depending on the printers, it will be necessary to print in 100% but for others in 97%, so be careful and try beforehand.

Flexible filament printing recommended!

Enjoy

FR :

Flexible Filament (240 °C for mine which is EmotionTech, look at the manufacturer's recommendations)

Tray at 80 - 90 °C + 3DLac or Dimafix

No support

0.15 or 0.20 layers

Brim if needed (12 laps)

EN:

Flexible Filament (240°C, I use the EmotionTech one, check advices from the manufacturer)

Bed: 80 to 90 °C + 3DLac or Dimafix

No Support

0.15 or 0.2 layer

Brim if needed up to 12.