PS4 leg/feet to allow air flow under and round your ps4 to help keep it cool

(THIS WORKS PERFECTLY WITH MY ANYCUBIC MEGA X)

These are the iconic PlayStation symbols that click on to the side of a PS4 to raise the console off the surface to allow air to circulate round. It also stops heat transfer from the PS4 to any electronics it may be sat on (e.g. DVD play, TV box, another PS4 this is what happened to my home surround sound, the PS4 got hot and transferred its heat to my surround sound and blow up). This also allow you to place the PS4 straight on to the floor with out worrying that hair, carpet, liquid will touch the underneath getting clogged up the air vent or liquid damaged.

The only reason why i made these is because the free ones on this site didn't want to load correctly or didn't work. so I made my own so i could make sure they fitted correctly

I could change the symbols for different designs if there is something you would like message me and ill see what i can do

you will get 5 files each containing each leg/foot

The painting doesn't do them any faves

I used PLA
layer height.. 0.2
infill............... 20%
supports....... on
hot end.........200 degrees
hot bed ........ 60 degrees
(but your setting for your PLA might be different)

I placed the symbols on the work bed to make sure the cut outs was perfect size to click on to the PS4 and when i removed the supports i sanded the support faces down to make nice