Customizable Apple iPad Pro Pencil Clip

Designed to make different clips for the Apple iPad pro pencil as it seems Apple simply forgot to add one!

##Variables:##
Diameter of Apple Pencil(mm) Adjust for Plastic
Pencil_Dia = 8.8 (this the measure dia of the pencil, scale for snugness of fit)

Diameter of Barrel(mm)
Barrel_Dia = 15 (How big to make the clip barrel)

Length of Barrel(mm)
Barrel_Length = 20 (The run or length of barrel aside from clip)

Number of Barrel sides (4-square to 100-round)
Barrel_Sides = 6 (4 will be square while 100 will be very round, select per your tastes)

Clip thickness (mm)
Clip_Thickness = 5 (This affects the "gap" between clip and pencil, but is not the gap)

Clip length (mm)
Clip_Length = 60 (Length of clip port and maybe affected by number of sides)

Alter Shape of Clip
Clip_Shape = 6 (use 3=Triangle up to 100=Round)

Slot width(mm)
Slot_Width = 2 (Width of the expansion slot in side of barrel)

Note: Had to change the model somewhat from the original design as too many slicers where having issues with the thin clip as well as when printed in PLA, they broke to easily. In addition, if you having issues printing the clip. Try printing two at once to allow more cool down time because the movement area is so small the filament may not be getting enough time to cool.

If there are other additions or changes, please message me via Thingiverse and I will see about adding them. Also will be making several other addons for the pencil so be sure to follow me on Thingiverse.