Tevo Tarantula Side Mount Case

Please provide feedback if you choose to print this. This part is specific to the boards and other components I use in my set up, if yours differ you will need to edit the fusion 360 file provided. 

## Parts:  MKS Base/SKR1.3 main board Raspberry Pi for octoprint Mosfet for heated bed: https://www.aliexpress.com/ite... Power Supply plug: https://www.aliexpress.com/ite... 120MM case fan (any will do Buck converter: https://smile.amazon.com/gp/pr...

## Notes I use octoprint to control my printer but in the future I will likely add a controller for the front You do need the extended bed on the tarantula, You can possibly split the parts even smaller and print them on the smaller bed if you need to Some files used from remixed sources.

## Design Files https://a360.co/2uROYpI Files are to large for thingiverse, find them on the autodesk website above.

##Thanks A special thanks to pin13 for providing the tevo tarantula model and to r3z0 for providing the board models  to make designing this easier.