VW and AUDI Triangle Trunk Box Loop

Hello everyone, I modelled this part because due to vibrations and use, it broke. I think this breakage is frequent, that's why I share this creation with you today.

I created this piece a little more reinforced, I think, thanks to its rectangular shape and not triangular at the end.

Here is the list of compatible vehicles found on the internet:

For VW Bora1999 - 2005

For VW Caddy2004 -->

For VW Golf Cabriolet2012-

For VW Golf 4 Limousine1998 - 2002

For VW Golf 5 Limousine2003 - 2006

For VW Golf 5 variant2007 - 2009

For VW Golf 6 variant2010 - 2014

For VW Golf 7 variant2014 -->

For VW Jetta A5 (1K)2006 - 2010

For VW Passat 3C B6 Limousin/variant2006 - 2011

For VW Passat 3C B7 Limousin/variant2011 - 2015

For VW Sharan 7N2011 -->

For VW Tiguan 5N2008 - 2015

For VW Touran2006 - 2010

For Audi A5 / S5 Sportback2008 - 18.10.2010

For Audi Q7 4L2007 - 2015

For seat Alhambra2011 -->

Please let me know in comments if the part needs adjustment(s).

Good impression!

0.4mm nozzle

Profiles from 0.2

Filling: 40%.

With support

With Adhesion

Type of adhesion of the edge plate

Filling pattern: grid

Printing temperature: 205° C

Temperature of the tray: 55° C

Printing speed: 45mm/s

Moving: Activate retraction

Printing time: approx. 53 min with CURA

These are my own settings, it's up to you depending on your printer.