NAPKIN RING, NAPKIN HOLDER

Napkin ring composed of four identical tongue and groove pieces.

Designed to carry up to a pack of 100 standard sized square napkins (155*155 mm), although it can be adapted to any type of square napkin by scaling the pieces in the rolling mill itself. The printing is very dry and lasts about 2 hours per piece if the filling is 100%.

Napkin Holder composed of four identic pieces.

Created to carry up to a package of 100 square napkins of standard size (155*155 mm), although it can be adapted to any type of square napkin by scaling the parts in the laminator itself. Printing is very easy and about 2 hours long per piece if the fill is 100%.

Print parameters /

print parameters

[profile]

layer_height = 0.2

wall_thickness = 0.8

retraction_enable = True

solid_layer_thickness = 0.6

fill_density = 100

print_speed = 60

print_temperature = 210

print_bed_temperature = 40

support = Everywhere

platform_adhesion = Brim

support_dual_extrusion = Both

wipe_tower = False

wipe_tower_volume = 15

ooze_shield = False

filament_diameter = 1.75

filament_flow = 100.0

nozzle_size = 0.4

retraction_speed = 40.0

retraction_amount = 4.5

retraction_dual_amount = 16.5

retraction_min_travel = 1.5

retraction_combing = All

retraction_minimal_extrusion = 0.02

retraction_hop = 0.0

bottom_thickness = 0.0

layer0_width_factor = 100

object_sink = 0.0

overlap_dual = 0.15

travel_speed = 80

bottom_layer_speed = 40

infill_speed = 0

solidarea_speed = 15

inset0_speed = 40

insetx_speed = 60

cool_min_layer_time = 5

fan_enabled = False

skirt_line_count = 1

skirt_gap = 3.0

skirt_minimal_length = 150.0

fan_full_height = 0.5

fan_speed = 100

fan_speed_max = 100

cool_min_feedrate = 10

cool_head_lift = False

solid_top = True

solid_bottom = True

fill_overlap = 15

perimeter_before_infill = False

support_type = Lines

support_angle = 60