Fluff filter for laundry dryer

The lint filter of the dryer is broken, and the part is no longer manufactured and is no longer on the internet. Just print it out.

So I modeled this lint filter from the broken piece.

After a few hours of making and printing (14 hours of printing for both parts) it is still necessary to glue a very fine filter (I reused the original ones by peeling them off with a hot air gun and then "soldering" them in the same way, that's why you can see brown/black marks on one of the pictures. Be careful not to go too hard not to melt the new part).

Here you go, a brand-new filter. No need to buy a new washing machine, no need to live with stuffed animals everywhere...

If needed, only one of the two parts can be printed (if only one is broken), it is compatible with existing parts.

According to my research, this filter is compatible with the following makes and models:

Link (https://www.menager-technic.fr/pieces-detachees-electromenager/lavage/seche-linge/filtre-a-peluches/filtre-epuise-263339.html)

MEA tumble dryer:

MEA M1000B - MEA M1050 - MEA M900 - MEA M930 - MEA M950B - MEA M955 - MEA M960R - MEA SL895

Ladywind dryer:

LADYWIND SL95

Luxor dryer:

LUXOR SL90

Victory dryer:

VICTORY M950B

Windsor dryer:

M950B R.WIND

WARNING, for this model, IT IS IMPERATIVE TO PRINT IN ABS.

Indeed, PLA starts to deform from 60°C and ABS from 97°C onwards. A tumble dryer can rise up to 90° depending on the cycle used.

Printed in the position of the STL file WITH SUPPORT

Layer thickness 0.2mm

Nozzle Ø0.4mm

Personally, I used a curb catchphrase.