Ortur Laser Master Cable Management!

We added a ORTUR Laser Master 2 32-bit Motherboard Laser Engraving Machine 400 x 430mm Large Engraving Area Fast Speed High Precision Laser Engraver (see more here: http://diy3dtech.com/ORTUR_Laser_Master ) to our collection of tools however quickly noticed that cable like on most Chinese imports was a lacking so to Fusion 360 we turned to solve the problem! Here is how it all works (also see pictures):

**Ortur Laser Cable Holder_x3.stl **You will need to print three (3) of these and for the X-Axis you will use an existing hole in the mounting plate (again see photo). For the Y-Axis you will need to drill two 3mm holes and you will require 3mm bolts (see more here: https://amzn.to/3fBpuQ6 ). This part does have modeled threads on one side so the direction is important (as the other side is a pass though hole). Worth note I did for the Y-Axis also 3mm nuts because of the extra stress however this is up to you. Also, while the cable wrap does snap into the sleeve, we recommend small zip-ties as you see in the pictures. Too, for the most part the X-Aixs which is the most problematic is held out of the way, however you could also add piece of solid picture hanging to stiffen it more and hold it vertical.

Ortur Laser Cable Holder Laser Head.stl Requires only and attaches to the laser head with the two existing bolts and receives the cable race from the gantry. Again use a zip-tie to restrain the cable.

Also quality laser safety glasses are important as your eyes are irreplaceable so we use these: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses

Don't forget our YouTube channel here: http://YouTube.DIY3DTech.com as if you want to see what we are up to daily which you do right? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog or follow us on Instagram at https://www.instagram.com/diy3dtech/ well read our posts on tumlr here https://www.tumblr.com/blog/diy3dtech

Major Favor: if you make one of these please post the Make and share it with the community :-) .

Also, **please follow us on Thingiverse and give this a like if this came in handy **and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com

If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)!