Skip to content

Pea Shooter Boredom Buster

PeaShooter-1.jpg Pea Shooter Boredom Buster
PeaShooter-2.jpg Pea Shooter Boredom Buster
PeaShooter-3.jpg Pea Shooter Boredom Buster
WhatAnAngel.gif Pea Shooter Boredom Buster
Quality-Shell_Infill.png Pea Shooter Boredom Buster
Material-Speed-Travel.png Pea Shooter Boredom Buster
Cooling-Support-Adhesion.png Pea Shooter Boredom Buster
PrintLayout-Time.png Pea Shooter Boredom Buster
PeaShooter Rev C Finger Ring v6 - 20200704.stl Pea Shooter Boredom Buster
PeaShooter Rev D Plunger v5 - 20200705.stl Pea Shooter Boredom Buster
PeaShooter Rev C Handle v10 - 20200705.stl Pea Shooter Boredom Buster
PeaShooter Rev C Housing v10 - 20200705.stl Pea Shooter Boredom Buster
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.5k views
  • 1 like
  • 1 download
License
3D design format
STL Folder details Close
  • PeaShooter Rev C Finger Ring v6 - 20200704.stl
  • PeaShooter Rev C Handle v10 - 20200705.stl
  • PeaShooter Rev C Housing v10 - 20200705.stl
  • PeaShooter Rev D Plunger v5 - 20200705.stl

Learn more about the formats
Last update 2021-03-15 at 12:45
Publication date 2020-07-06 at 16:16
Design number 168785
DetailDesignSystems

DetailDesignSystems

3D printer file info

3D model description

Just because I was bored and had time on my time due to furlough.

To use: You will need to purchase some #11 O-Rings (3/4" OD x 9/16" ID x 3/32"). Clip the handle into the bottom of the plunger. It is a little tight but use some pressure and it will snap into place. Install the O-Rings on the plunger. Slide the finger rings into the dovetail slots on the housing. Use some O-Ring grease or petroleum jelly on the O-Rings. Slide the plunger assembly into the housing and you are ready to fight boredom.

Use a very small amount of tissue and wet it. Place it in the end of the nozzle and POP! You can also use water. You may need to play around with the amount of tissue to get the best results.

3D printing settings

Printer Used: Creality CR-10 V2
Material Used: eSun's silver PLA Plus
Scale: Set scale for each piece to 2540

Print two of the finger rings and one each of the other parts.

For print settings and print time see pictures. I also included a picture showing the slicer preview and the orientation of the parts for printing.

Very minimal support is generated for the plunger. The rest of the parts use little to no support. I recommend printing with a brim.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.